Exposure time mini 4K?

#1

Hi
I do my first steps with the Phrozen sonic mini 4K
Im not sure but it seems that the exposure time is to short and the layers are not stable enough.
Can i resolve this issue increasing the exposure time?

resin: RESINWORKS EASYCAST HD LCD CASTABLE RESIN SAMPLE - VIOLET OPTIMIZED FOR PHROZEN

01830da5-16b8-4001-bdd8-3dc4caae7601
01830da5-16b8-4001-bdd8-3dc4caae7601.jpg777x1600 117 KB
a0cbb634-7140-4d1b-a47c-960592e54510
a0cbb634-7140-4d1b-a47c-960592e54510.jpg777x1600 80.8 KB
cc3b3bb8-a218-4087-8921-a748e8416e31
cc3b3bb8-a218-4087-8921-a748e8416e31.jpg777x1600 50.3 KB
fe7271f6-7de4-4c59-9c03-32f7d7e7ca2b
fe7271f6-7de4-4c59-9c03-32f7d7e7ca2b.jpg777x1600 156 KB
fff2d4aa-4c4e-4bcc-aabe-05121f63cabb
fff2d4aa-4c4e-4bcc-aabe-05121f63cabb.jpg777x1600 70.2 KB
valores
valores.jpg743x525 90.8 KB

#2

Yes you could.
It might also make sense to look at how even the UV exposure is around the build table.
You can do this simply by putting a blank A4 paper on the screen and turn exposure full on in test mode (if there is one). You might see darker spots where less UV comes through.